Cascade Yarns Superwash Merino yarn (100% wool; 200 m / 100 grams per skein) - 5 (5, 6, 6, 7) skeins of dark gray color (MS thread), 1 skein of yellow (thread A) and white (thread B) colors; yarn for embroidery Cascade Fingering (100% wool; 246 m / 50 grams per skein) - 1 skein of dirty yellow (thread C), pink (thread D), olive (thread E), green (thread F) and white (thread G) colors; 6 buttons with a diameter of 22 mm.
Circular knitting needles No. 3.5 60 cm long and No. 4 80 cm long, set of double-pointed knitting needles No. 4, loop markers, buttonhole holders, tapestry needle.
21 stitches and 29 rows = 10 cm of front surface made with knitting needles No. 4.
Remarks:
The pullover consists of one part, which is knitted in straight and reverse rows from the bottom to the armpits. Sleeves are made in circular rows from the bottom edge to the armpits. Then the sleeves are attached to the main part, and then a round yoke is performed.
Embroidery is done after knitting the pullover.
The jacquard pattern is carried out by front stitch. When changing the color of the thread, cross on the wrong side to avoid the formation of holes.
Circular knitting needles are used to knit a large number of loops.
PATTERN
Start of knitting:
Circular knitting needles No. 3.5 and thread MC dial 191 (211, 231, 251, 271) loops.
1st row (front): * 1 front loop, 1 wrong loop; repeat from * to the last loop, remove 1 loop, thread in front of the loop.
2nd row: 1 front loop, * 1 front loop, 1 wrong loop; repeat from * to the last 2 loops, 1 front loop, 1 loop to remove, thread in front of the loop.
Repeat the 1st and 2nd rows until the gum reaches 4 (4, 4, 5, 5) cm from the stacked row, end with the wrong side.
5th row (front, button hole): [1 front loop, 1 wrong loop] - 2 times, 1 double crochet, 2 loops to knit together the front, 1 front loop, 1 wrong loop, place the shelf tie marker, knit with an elastic band to last loop, remove 1 loop, thread in front of the loop.
Knit further directly with an elastic band until only 14 rows from the typesetting edge are tied.
Note: Repeat button holes in each 32nd row 5 more times.
Change knitting needles to number 4.
1st row (front, installation): [1 front loop, 1 wrong loop] - 4 times, place a marker, 44 (49, 54, 59, 64) front loops, place a marker, 1 front loop behind the back wall (side side), place a marker, 85 (95, 105, 115, 125) front loops, place a marker, 1 front loop behind the back wall (side), place a marker, 44 (49, 54, 59, 64) front loops, [ 1 wrong loop, 1 front loop] - 3 times, 1 wrong loop, 1 loop to remove, thread in front of the loop.
Note: re-shoot markers in each row.
2nd row: 2 front loops, [1 back loop, 1 front loop] - 3 times, back loops to the last 8 loops, [1 front loop, 1 back loop] - 3 times, 1 front loop, 1 loop remove the thread in front of the loop.
3rd row (front): [1 front loop, 1 wrong loop] - 4 times, 44 (49, 54, 59, 64) front loops, 1 front loop behind the back wall, 85 (95, 105, 115, 125 ) front loops, 1 front loop behind the back wall, front loops up to the last 8 loops, [1 wrong loop, 1 front loop] - 3 times, 1 wrong loop, 1 loop removed, thread in front of the loop.
Repeat the 2nd and 3rd rows, simultaneously making holes for the loops in each 32th row or every 13 cm, until the knitting height reaches 38 (38, 38, 39.5, 39.5) cm from the set row, end with the wrong side .
Division for armholes:
Next row (front): 8 gum loops, front loops up to 4 loops in front of the side marker, 9 front loops and transfer these 9 loops to the loop holder, front loops up to 4 loops in front of the next side marker, 9 front loops and transfer these 9 loops to the loop holder, front loops to the last 8 loops, knit with elastic to the end of the row.
Set knitting aside.
Sleeves:
Using double-pointed knitting needles, dial 48 (50, 50, 52, 52) loops. Connect the loops in a circular row and place the beginning row marker.
Knit 23 circular rows with front stitch (front loops in all rows).
Circular row of applications: 1 front loop, 1 add a loop from the broach, front loops to the last loop, add 1 loop from the broach, 1 front loop - 2 loops added.
Repeat these additions in each 16 (16, 14, 14, 10) -th row another 4 (4, 6, 7, 9) times - on the spokes of 58 (60, 64, 68, 72) loops.
Knit further directly with the front stitch, until the knitting height reaches 42 (43, 43, 45.5, 45.5) cm from the beginning of knitting.
Top of sleeve:
Knit 5 front loops and transfer these loops to the loop holder, front loops to the last 4 loops of the row, transfer these 4 loops to the same loop holder. Cut the thread. Move the remaining 49 (51, 55, 59, 63) loops to a separate loop holder.
Yoke:
Connection row (front): use 4 circular knitting needles and an MS thread to knit loops from the loop holders as follows: starting from the right shelf, 8 elastic loops, 40 (45, 50, 55, 60) front loops, 49 (51, 55, 59 , 63) front loops of the first sleeve, 77 (87, 92, 107, 117) front loops of the back, evenly adding 2 (2, 1, 10, 14) loops, 49 (51, 55, 59, 63) front loops of the second sleeve , 40 (45, 50, 55, 60) front loops of the left shelf, elastic to the end of the row - on the needles of 269 (293, 317, 341, 365) loops.
Next row (wrong side): 8 loops of elastic, back loops to the last 8 loops, elastic to the end of the row.
To connect 2 more (6, 10, 12, 16) rows of the front surface with 8 loops of elastic at the edges.
Start knitting pattern:
1st row (front): MS thread, 8 loops of elastic, 21 (23, 25, 27, 29) times repeat the pattern repeat of 12 loops, then knit once the 1st loop of the pattern, 8 loops of elastic with MS thread .
DIAGRAM
Continue to knit in the prescribed manner, knitting the last 8 loops with an elastic band, until the 46th row of the pattern inclusive - on the needles of 143 (155, 167, 179, 191) loops.
Neckline neckline:
Next row (front): MC thread, 8 loops of elastic, thread B, 84 (90, 96, 102, 108) front loops, twist the next loop and turn the knit.
Next row (wrong side): 41 wrong loop, twist the next loop and turn the knit.
Next row: 33 front loops, wrap around the next loop and rotate knitting.
Next row: 29 purl stitches, wrap around the next stitch and rotate knitting.
Next row: 25 facial loops, twist the next loop and rotate knitting.
Next row: 21 purl stitch, wrap the next stitch and rotate knitting.
Next row: front loops to the last 8 loops, raising the loop of the loop, 8 loops of elastic.
48th row of the pattern: knit all the loops purl, lifting the loop of the loop.
To connect the 49th row of the pattern - on the knitting needles 101 (109, 117, 125, 133) loop.
50th row of the pattern: knit a row by uniformly adding 0 (0, 8, 14, 18) loops - on the knitting needles 101 (109, 109, 111, 115) loop.
Neck strap:
With knitting needles No. 3.5 and a thread of MS, knit 2 rows with an elastic 1x1.
In the next row, make a hole for the button. Then knit with an elastic band until its height reaches 2.5 cm, finish with the wrong side. Close all loops.
Completion:
Thread the ends of the threads and steam the parts. Run armpit stitchesknit stitch. Sew buttons opposite the holes.
Embroidery:
Note: chain stitch and straight stitches for leaves are made using a tapestry needle; the remaining stitches and French knots are sewn with a needle. See photo for sample.
Yoke:
On rows 8-12, embroider the flowers as follows: thread F in two folds, sew the leaves with straight stitches, fold 1 thread C and D together and embroider the flowers with straight stitches. On the 15th row, complete the chain with a chain stitch with thread D in 1 addition. On the 45th row, complete the chain with a chain stitch with thread F in 1 addition. On the 46th row, complete the chain with a chain stitch with thread C in 1 addition.
Sleeves:
The vine on the sleeve is a chain of chain stitch thread F in 1 addition.
Dandelions are made with straight stitches with thread E in 1 addition. The ends of dandelion are embroidered with straight stitches with thread G in 1 addition.
French knots are made by thread G in 2 additions.
Leaves are sewn with straight stitches with thread F in 1 addition.