BRIGHT PULLOVER WITH A HOOD

Click For Crochet Abbreviations List


The pullover with pockets, a hood with ties and an originally designed neckline attracts bright colors of section dyeing yarn

DIMENSIONS
36/38 (40/42) 44/46
 

 
YOU WILL NEED
Yarn (100% natural wool; 120 m / 50 g) - 850 (900) 950 g of coral-violet sectional dyeing; knitting needles No. 5 and 5.5; circular knitting needles No. 5.5; hook number 5.5.
 

PATTERNS AND SCHEMES

Knit elastic band A and B on knitting needles No. 5.
 

RUBBER A
An odd number of loops. Wrong rows: edging, alternately 1 purl, 1 front, finish 1 purl, edging. Front rows: knit loops according to the drawing.
 

RUBBER B
An even number of loops = edge, alternately 1 front, 1 wrong side, edge.

The following patterns are knitting on needles No. 5.5.
 

FACE FACE
Front rows - front loops, wrong rows - wrong loops.

Bright pullover with a hood and pockets

 

GARMENT KNITTING
Front and back rows - front loops.
 

CROSS RUBBER
* 2 rows of facial smoothness,
2 rows of garter stitch  , 
from * constantly repeat.
 

"SCYTHE" A (16 LOOP)
Knit acc. Scheme 1. On it are given the front rows. In the wrong rows, knit all the loops according to the picture. Run 1-10 rows 1 time, then constantly repeat 3-10 rows.




CENTRAL PATTERN
First, at 21 p., After the 1st row, knit at 26 p. Scheme 2. On it are given the front rows. In the wrong rows, knit the loops according to the drawing or acc. instructions. Run 1-18th rows 1 time, then constantly repeat 3-18th rows.




"SCYTHE" B (FOR 16 LOOPS)
Knit as a “braid" A, but in the 5th row, cross 8 points to the left (= 4 points left on the auxiliary knitting needle before work, knit the next 4 points face, then knit the stitches from the auxiliary knit).
 

KNITTING DENSITY
Cut strap: 6 p. + 1 edge = 2.5 cm; 
18 p. X 27 p. = 10 x 10 cm, tied with a transverse elastic band; 
21.5 p. X 27 p. = 10 x 10 cm, connected by patterns "braid" A and B; 
26 p. = 13 cm, connected by a central pattern; 18 p. X 36 p. = 10 x 10 cm, knitted with a garter stitch. 

 

ATTENTION
At the front, the bandages of the garter stitch are adapted to the rest of the patterns in height. On the pattern, the height is calculated by the density of knitting with a transverse elastic band.

Due to the patterns on the front, a different number of loops is required for the back and front, but the dimensions of both parts are the same.
 

PATTERN




COMPLETING OF THE WORK
 

BACK
Type 87 (95) 103 p.p. and knit 5 cm = 13 rows for a placket with elastic A, while starting from 1 wrong side and in the last wrong side, reduce 1 p. In the middle (on both sides from the middle 77 p. 1 st.) On average 89 st. Evenly reduce 3 st. = 86 (93) 100 st. 

Continue the work as follows: edge + 6 st. Continue to knit with elastic band A (= cut bar), 72 (79) 86 st. Cross with an elastic band, 6 p. continue to knit with an elastic band A + edge (= section bar). 

After 6.5 cm = 18 rows from the plank, continue work between the edge elastic bands on all loops. 

At the same time, for the trapezoidal silhouette, reduce on both sides in each 20th row from the bar 5 x 1 p. (Alternately in each 18th and 20th row 5 x 1 p.) In each 18th row 5 x 1 p. = 76 (83) 90 p. 

After 43 cm = 116 rows (41.5 cm = 112 rows) 40 cm = 108 rows from the plank close for the armholes on both sides 1 x 3 p., Then in each 2nd row close 1 x 2 p. And 4 ( 5) 6 x 1 p. = 58 (63) 68 p. 

After 63 cm = 170 rows from the plank, close all the loops as face, while the average 24 (23) 24 p. Form the neck, the outer 17 (20) 22 n. - shoulders. 
 

POCKET LINING
Type 36 (38) 40 p.p. and knit 6 cm with the front stitch. Then leave the loop.
 

BEFORE
Type 87 (95) 103 p.p. on the knitting needles and tie 5 cm = 13 rows with a rubber band A for the strap, and start with 1 wrong side row. 

Continue the work as follows: edge + 6 p. Continue to be knitted with an elastic band A (= cut bar), 5 (8) 11 p. With transverse elastic, 16 p. With the braid A, 5 (6) 7 p. p. central pattern, 5 (6) 7 p. handkerchief, 16 p. pattern “braid” B, 5 (8) 11 p. transverse elastic, 6 p. continue to knit with A + hem (= slit strap). As a result of the additions in the central pattern, after the 1st row, the needles will have 92 (100) 108 sts. 

After 6.5 cm = 18 rows from the plank, include the loop of the cut planks in pattern 5, continue the remaining patterns. 

Simultaneously perform reductions for the trapezoidal silhouette, as on the back = 82 (90) 98 p. 

At the same time, after 20 cm = 54 rows from the plank, leave the middle 36 (38) 40 p. For the upper side of the pocket. 

Instead, turn on the pocket lining loops behind the left loops and knit 5 (6) 7 p. Garter stitches, 26 p. facial stitch, 5 (6) 7 p. garter stitch, 
continue the rest of the patterns. 

After 33.5 cm = 90 rows from the bar, leave all the loops. 

Then, left 36 (38) 40 p. Of the upper side of the pocket to transfer to working knitting needles and continue to carry out the existing patterns, but without hem. 

After 33.5 cm = 90 rows from the plank, place the loops of the upper side of the pocket in front of the middle 36 (38) 40 p. Of the pullover and in the next front row knit 1 p. Of the upper side of the pocket with the corresponding loop of the pullover together according to to the pattern. Then continue on all loops according to to the pattern. The armholes should be done as on the back = 64 (70) 76 p. 

After 49.5 cm = 134 rows from the bar (= after the 6th row of the pattern), divide the work in the middle for the neck and finish both sides separately, the loops at the edge of the work separation will edging. 

For the bevel of the neck along the inner edge, knit in each 2nd row after and before the edge 13 x 2 p. Together the front respectively, and knit the resulting loop in the wrong row, then knit without decrease. At the height of the back, close the remaining 19 (22) 25 p. Shoulders.
 

SLEEVE
Type 46 (50) 54 pips on each knitting needle and tie 5 cm = 13 rows with a rubber band B for the strap, starting with 1 wrong side. 

Continue to work with the cross elastic. 

At the same time, add bevels on both sides alternately in each 12th and 14th row from the plank 8 x 1 p. (In each 12th row 7 x 1 p. And in each 10th row 2 x 1 p. ) in each 12th row 2 x 1 p. and in each 10th row 8 x 1 p. pattern = 62 (68) 74 p. 

After 43 cm = 116 rows from the plank, close for okat on both sides 1 x 3 p., then in each 2nd row close 1 x 2 p., 15 x 1 p. and 2 x 2 p. 

After 57 cm = 154 rows from the plank, close the remaining 14 (20) 26 p.
 

HOOD
Starting at the throat insert, dial 3 p. On the knitting needles and knit with a garter stitch. 

For beveling of the neck, add 13 x 1 p. Of garter stitch = 29 p. On both sides alternately in each 2nd and 4th row from the starting row. 

After 10.5 cm = 38 rows from the starting row, close the middle loop for the cut and first continue work for the left half of the hood in the first 14 st. 

After 18 cm = 64 rows from the initial row, dial 1 x 20 p. For the rear edge of the stitching along the right edge, then in the 2nd row, dial another 2 x 3 new loops. 

After 19.5 cm = 70 rows from the initial row, leave these 40 p. Knit the right half of the hood in a mirror image. 

Then, transfer both halves of the hood to circular knitting needles and continue working with a garter stitch in rows forwards and backwards for all 80 stitches. 

At the same time, add on both sides from the middle 2 p. In each 2nd row from the work connection 8 x 1 front crossed from the transverse thread = 96 p. 

To round the hood through 26 cm = 94 rows from the work connection, reduce in the middle of the back of the hood 2 p., for this, knit the 1st middle loop with the previous loop together with the front one, knit the 2nd middle loop with the next loop along with the left tilt (= 1 p. remove as the front one, 1 front, then stretch it through the removed loop) . Repeat these decreases 9 more times in each 2nd row = 76 p. 

After 31.5 cm = 114 rows from the work connection, knit to the middle, then fold 38 p. On 2 knitting needles with the front sides. 

To make the seam of the hood, knit 2 p. (= 1 p. From each knitting needle) together with the front and close until all the loops are used up. Cut the thread and stretch through the last loops.
 

ASSEMBLY
Perform shoulder seams. 

Sew the hood into the neck, slightly fitting the rear edge. Sew in sleeves, sew side seams and sleeve seams. 

For ties, make one chain of air loops 50 cm long (measure in unstretched form) and tie it with a hook 1 next to the joint. Art. 

Sew strings to the edges of the hood at shoulder height. 

Sew the inside of the pocket to the front.




Post your comment

Information!  You need to be a member to comment. You can easily sign up from here.

0 comments